The content of these Pathways have been agreed by Enginuity. These are the only apprenticeship Pathways in the Engineering sector approved for use in Wales that are eligible for Medr funding.
Cynnwys y Rhaglen Ddysgu
The Learning Programme provision shall comprise of three mandatory elements:
Qualifications,
Essential Skills
On/off the job training
The total minimum credit value required for the:
Level 4: Aerospace is 245 credits.
Level 4: Mechanical is 245 credits.
Level 4: Electrical / Electronics is 245 credits.
Level 4: Automotive is 245 credits.
Level 4: Maintenance is 245 credits.
Level 4: Wind Generation is 245 credits.
Level 4: Marine is 245 credits.
Level 4: Space Engineering is 245 credits.
Level 4: Rail Engineering is 245 credits.
Gofynion mynediad
General Entry Requirements for - Level 4 – Aerospace/ Mechanical /Electrical / Electronics/Automotive/Maintenance/Wind Generation/Marine/Space Engineering/Rail Engineering.
Employers wish to attract applicants who have an interest in working in a manufacturing/ engineering environment at technician level and who come from a diverse range of backgrounds with a wide range of experience, achievements or qualifications. Please note: Applicants for this pathway need to be 18+ years
Entry to this pathway is flexible so that applicants:
may have variety of qualifications such as A Levels, Certificate/Diploma in Engineering, Apprenticeship in Engineering or
without formal qualifications can show, possibly through a portfolio, that they have the potential to complete this apprenticeship, through having previously worked in the sector at Level 3 or
they are currently employed in the sector and are looking for personal development and career progression.
Learners who have completed the Welsh Baccalaureate may have completed units or short courses which will provide underpinning knowledge towards the Apprenticeship. This will be assessed during an initial assessment allowing Recognition of Prior Learning (RPL), where appropriate.
Prior experience in the sector
Applicants that are already working in the sector or who have recently worked in the sector, can apply to have their experience formally recognised by an awarding organisation and this will count towards the qualification(s) in this pathway.
Specific Entry Conditions for - Level 4 – Aerospace/ Mechanical /Electrical/ Electronics/Automotive/Maintenance/Wind Generation/Marine/Space Engineering/Rail Engineering.
There are no additional requirements other than the general entry conditions
Rhaglen(ni) dd/dysgu'r llwybr prentisiaeth
Level 4: Aerospace
Level 4: Aerospace Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 1
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Aerospace | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 6 |
| Cymhwyso Rhif | 2 | 6 |
| Llythrennedd Digidol | 2 | 6 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Aerospace | 461 | 702 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Aerospace Foundation Apprenticeship is 1163.
Pathway duration approximately 42 months depending on the qualification and unit options selected
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
6 credits / 60 GLH Level 2 Essential Skills Wales Communication
6 credits / 60 GLH Level 2 Essential Skills Wales Application of Number
6 credits / 60 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Mechanical
Level 4: Mechanical Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 2
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 600/9486/2 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Mechanical | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Mechanical | 461 | 729 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4:Electrical/Electronics
Level 4:Electrical/Electronics Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 3
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 600/9486/2 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4:Electrical/Electronics | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4:Electrical/Electronics | 461 | 737 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Automotive
Level 4: Automotive Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 4
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 600/9486/2 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Automotive | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Automotive | 461 | 729 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Maintenance
Level 4: Maintenance Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 5
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 600/9486/2 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Maintenance | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Maintenance | 461 | 814 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Wind Generation
Level 4: Wind Generation Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 6
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 600/9486/2 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Wind Generation | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Wind Generation | 461 | 814 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Marine
Level 4: Marine Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 7
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 600/9486/2 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Marine | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Marine | 461 | 814 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Space Engineering
Level 4: Space Engineering Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 8
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Space Engineering | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Llythrennedd Digidol | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Space Engineering | 461 | 814 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Level 4: Rail Engineering
Level 4: Rail Engineering Cymwysterau
Participants must achieve one of the following competence qualifications below and and one knowledge qualifications from Annex 9
| Level 4 NVQ Extended Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/7 | 107 | 1070 | Gwybodaeth | English Only |
| Level 4 NVQ Diploma in Engineering Manufacture | |||||
|---|---|---|---|---|---|
| Corff Dyfarnu | Rhif y Cymhwyster | Gwerth Credyd | Cyfanswm Amser y Cymhwyster | Cymhwysedd / Gwybodaeth / Cyfun | Iaith/Ieithoedd Asesu'r Cymhwyster |
| EAL | C00/0549/6 | 80 | 800 | Gwybodaeth | English Only |
Sgiliau Hanfodol Cymru (ESW)
| Level 4: Rail Engineering | Lefel | Isafswm Gwerth Credyd |
|---|---|---|
| Cyfathrebu | 2 | 7 |
| Cymhwyso Rhif | 2 | 7 |
| Llythrennedd Digidol | 2 | 7 |
Essential Skills Wales qualifications assessment languages are English-Welsh
Hyfforddi yn y gwaith / i ffwrdd o'r gwaith
| Llwybr | Isafswm Oriau Hyfforddi yn y Gwaith | Isafswm Oriau Hyfforddi i Ffwrdd o'r Gwaith |
|---|---|---|
| Level 4: Rail Engineering | 461 | 694 |
Manylion y Cymhwyster yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
245 credits for competence and knowledge.
The total amount of learning hours which includes both on and off-the-job training for the Signalling Apprenticeship is 1190.
Pathway duration approximately 42 months depending on the qualification and unit options selected.
Manylion Sgiliau Hanfodol yn y Gwaith/i Ffwrdd o'r Gwaith (Isafswm Credydau ac Oriau)
7 credits / 70 GLH Level 2 Essential Skills Wales Communication
7 credits / 70 GLH Level 2 Essential Skills Wales Application of Number
- 7 credits / 70 GLH Level 2 Essential Skills Wales Digital Literacy
Dilyniant
Progression from the Level 4 Apprenticeship – Aerospace/Mechanical/ Electrical - Electronics/Automotive/Maintenance/Wind Generation/Marine/ Space Engineering/ Rail Engineering
Progression routes into the pathway include those who have:
A or AS levels in Science, Technology, Engineering or Mathematics subjects and GCSEs in English, Maths and Science - grade C (new equivalent grade 4) or above or
a Welsh Baccalaureate or
completed a Level 3 Engineering Apprenticeship or
have completed a 14 to 19 Advanced Diploma in Engineering or Manufacturing or
previous work experience or employment in engineering at Level 3 or
other relevant qualifications, experience or skills as given in the entry conditions.
Progression from this pathway for those who have completed a Higher Apprenticeship in Advanced Manufacturing Engineering :
progression to the new Degree Apprenticeship in Manufacturing Engineering at Level 6
progression to the Higher Apprenticeship pathway for Advanced Manufacturing Engineering at Level 6 Please note that there is no Level 5 Higher Apprenticeship programme
- employment as a technician in aerospace/mechanical/Electrical-Electronics/ Automotive/Maintenance/Wind Generation/Marine/Space/Rail engineering in a variety of job roles and functions (see job roles).
This Apprenticeship provides excellent preparation towards professional registration as an Engineering Technician and progression to Incorporated Engineer registration via the Degree Apprenticeship or Level 6 pathways. It may also, where appropriate, provide progression to a range of honours degrees.
Professional recognition The Institution of Mechanical Engineers (IMechE), the Institution of Engineering and Technology (IET) and the Royal Aeronautical Society (RAeS) recognise that this apprenticeship pathway provides the necessary skills, knowledge and experience to allow apprentices to apply for Engineering Technician status within their institutions. The apprenticeship does not confer automatic membership of any of these institutions as an Engineering Technician. Apprentices are free to apply to the institution of their choice and engage the process of registration.
Please note each institution will charge a registration fee, details of these are available through the weblinks below.
Cydraddoldeb ac Amrywiaeth
It is important that apprenticeship Pathways are inclusive and can demonstrate an active approach to identifying and removing barriers to entry and progression. Pathways should advance equality of opportunity between persons who share protected characteristics and those persons who do not as identified in the Equality Act 2010.
The Protected characteristics identified in the Equality Act are age, disability, gender re-assignment, race, religion or belief, sex, sexual orientation, pregnancy and maternity. Marriage and civil partnership is also included although only in respect of the requirement to eliminate discrimination in employment.
Training providers and employers MUST also comply with the other duty under the Equality Act 2010 to ensure that applicants are not discriminated against in terms of entry to the industry based upon those nine protected characteristics.
Cogent, Improve, ProSkills and Semta recognise the business benefits of having apprentices from a wide variety of diverse backgrounds to contribute to the talent pool. In particular the sector faces an aging workforce and the probability of skill shortages, therefore, we must look to attract new entrants from a much more diverse recruitment pool.
We are committed to ensuring that equality and diversity drives all aspects of apprentice selection and recruitment and recognise that this is a challenge in a sector which is traditionally white and male-dominated:
Process and Manufacturing Industries workforce historically has a poor image and a misconception that jobs in these industries are carried out in dark, dirty and potentially dangerous environments. On the contrary, nowadays Process and Manufacturing Industries are very high tech and largely controlled by sophisticated computer technology.
Science, engineering and technology - women make up 50% of the labour market, yet they make up less than 20% of the labour market in science, engineering and technology despite the Women into Science and Engineering projects run in the past.
As partners in this apprenticeship we are taking the following actions to help address these imbalances:
Cogent
Introduced a series of industry specific case studies and Careers Pathways on the Cogent Careers web site ( www.cogent-careers.com) to encourage people from all backgrounds to enter the nuclear industry
Works very closely with the National Skills Academy for Nuclear to promote various initiatives such as Energy Foresight within schools (www.nuclear.nsacademy.co.uk)
Regularly supports regional/national careers fairs/skills events to promote apprenticeships.
Works with representative groups such as the United Kingdom Resource Centre, engaging with their Women in Science and Engineering Work programmes.
National Skills Academy Food and Drink (formerly Improve)
Ongoing monitoring of data to identify any issues and intervene where necessary
Developing careers materials that are accessible to all
Identifying a process to make it easier for potential apprentices to gain information, e.g.by NSAFD's web site.
Enginuity
Signing up to the Government’s United Kingdom Resource Centre (UKRC) leading body for advanced gender equality in science, engineering and technology and the CEO's charter in a bid to step up female recruitment
Enginuity’s careers and qualifications centre includes an emag and articles encouraging more women into science and engineering
Statement on our website that “Semta Apprenticeships Service encourages and supports equal opportunities in the engineering and manufacturing industry. Applications for apprenticeship positions are encouraged from all sections of the community to ensure the industry’s workforce reflects the communities in which companies are based. Applications from people with disabilities are encouraged, however it is recognised that the nature of some employment may limit access for those with certain disabilities”.
Attend national careers fairs to promote science and engineering to a wide audience.
Apprenticeships are seen as a vital route to encourage and facilitate, a greater diversity of individuals into the industry, therefore entry conditions to this pathway are extremely flexible and mentoring has been included to contribute towards increasing retention and achievement rates.
Enginuity expects providers and employers to comply with the Equality Act 2010 to ensure that applicants are not discriminated against in terms of entry to and promotion within the sector.
Cogent, Improve, ProSkills and Enginuity will monitor take up and achievement through the Higher Apprenticeship Steering Group and take steps to address any barriers to take up and achievement as part of our Sector Qualifications Strategies.
Cyfrifoldebau a hawliau cyflogaeth (CHC)
Employment Responsibilities and Rights (ERR) is no longer compulsory. But it is recommended that all apprentices (especially the 16 years -18 year group) receive a company induction programme.
Cyfrifoldebau
It is the responsibility of the Training Provider and Employer to ensure that the requirements of
this pathway are delivered in accordance with the Welsh Government/Medr Apprenticeships
Guidance.
Further information may be obtained from: Medr
Annex 1 Aerospace
Please choose one of the following knowledge qualifications:
Foundation Degree FdEng in Aeronautical Engineering (Manufacture) | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | 240 | 2400 | Knowledge | English Only |
Foundation Degree FdEng Aircraft Maintenance | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | N/A | N/A | Knowledge | English Only |
Foundation Degree Fd Eng in Aeronautical and Manufacturing Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Coleg Cambria | N/A | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English-Welsh |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
Foundation Degree FdEng in Advanced Manufacturing Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Coleg Cambria | N/A | N/A | N/A | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1235/1 | 240 | 2400 | Knowledge | English Only |
Annex 2 Mechanical
Please choose one of the following knowledge qualifications:
Foundation Degree FdEng in Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Gower College Swansea | N/A | 240 | 2400 | Knowledge | English Only |
HNC Operations Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales - Newport | N/A | 150 | 1500 | Knowledge | English Only |
HNC Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales - Trinity St Davids | N/A | 160 | 1600 | Knowledge | English Only |
HNC Mechanical Technology | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University via Deeside College | N/A | 150 | 1500 | Knowledge | English Only |
Foundation Degree FdEng in Industrial Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | N/A | N/A | Knowledge | English Only |
HNC Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids (via SMU campus | N/A | N/A | N/A | Knowledge | English Only |
Foundation Degree in Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids (via Pembrokeshire College) | N/A | N/A | N/A | Knowledge | English Only |
Foundation Degree in Process Operations and Maintenance | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids (via Pembrokeshire College) | N/A | N/A | N/A | Knowledge | English Only |
HNC Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | 120 | 120 | Knowledge | English Only |
HND Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | 150 | 150 | Knowledge | English Only |
HNC Mechanical Technology | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University via Coleg Menai | N/A | 150 | 1500 | Knowledge | English Only |
HNC in Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University Of Wales Trinity St David | N/A | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
FdEng in Advanced Manufacturing Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Coleg Cambria | N/A | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 240 | 2400 | Knowledge | English Only |
University Certificate in Mechatronics | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | 60 | 600 | Knowledge | English Only |
HNC in Advanced Manufactuing Operations | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales (Trinity St Davids) | N/A | 120 | 1200 | Knowledge | English Only |
HND Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales (Trinity St Davids) | N/A | 240 | 2400 | Knowledge | English Only |
Annex 3 Electrical / Electronics
Please choose one of the following knowledge qualifications:
Foundation Degree in Electrical/ Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Gower College Swansea | N/A | 240 | 2400 | Knowledge | English Only |
HNC Electrical/ Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids | N/A | 160 | 1600 | Knowledge | English Only |
HNC Electrical/ Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University via Deeside College | N/A | 150 | 1500 | Knowledge | English Only |
Foundation Degree FdEng in Industrial Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | N/A | N/A | Knowledge | English Only |
HNC Electrical/ Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids (via SMU campus | N/A | 160 | 1600 | Knowledge | English Only |
HNC Mechanical Technology | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | 150 | 1500 | Knowledge | English Only |
HNC Electrical and Electronic Technology | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University via Coleg Menai | N/A | 150 | 1500 | Knowledge | English Only |
HNC Electrical and Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | 120 | 1200 | Knowledge | English Only |
HNC in Electrical and Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University Of Wales Trinity St David | N/A | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
Foundation Degree FdEng in Advanced Manufacturing Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Coleg Cambria | N/A | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 240 | 2400 | Knowledge | English Only |
University Certificate in Mechatronics | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | 60 | 600 | Knowledge | English Only |
HNC in Advanced Manufacturing Operations | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales (Trinity St Davids | N/A | 120 | 1200 | Knowledge | English Only |
HND in Electrical and Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales (Trinity St Davids | N/A | 240 | 2400 | Knowledge | English Only |
HND in Electrical and Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | 240 | 2400 | Knowledge | English Only |
Annex 4 Automotive
Please choose one of the following knowledge qualifications:
Foundation Degree FdEng in Industrial Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | N/A | N/A | Knowledge | English Only |
Foundation Degree in Automotive Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of South Wales | N/A | N/A | N/A | Knowledge | English Only |
HNC Electrical and Electronic Technology | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | 150 | 1500 | Knowledge | English Only |
Foundation Degree FdEng in Advanced Manufacturing Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Coleg Cambria | N/A | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Annex 5 Maintenance
Please choose one of the following knowledge qualifications:
HNC Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales, Newport | N/A | 160 | 1600 | Knowledge | English Only |
HND Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales, Newport | N/A | 240 | 2400 | Knowledge | English Only |
HNC Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids | N/A | 160 | 1600 | Knowledge | English Only |
Foundation Degree FdEng in Industrial Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | N/A | N/A | Knowledge | English Only |
HNC Instrumentation Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids (via SMU campus) | N/A | 160 | 1600 | Knowledge | English Only |
HND Power Systems Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids) | N/A | 160 | 160 | Knowledge | English Only |
Foundation Degree Instrumentation and Electrical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids (via Pembrokeshire College) | N/A | N/A | N/A | Knowledge | English Only |
HNC in Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University Of Wales Trinity St David | N/A | 120 | 1200 | Knowledge | English Only |
HNC in Electrical and Electronic Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales: Trinity St Davids | N/A | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
| Foundation Degree FdEng in Advanced Manufacturing Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Swansea University via Coleg Cambria | N/A | 240 | 2400 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 120 | 1200 | Knowledge | English Only |
HNC in Advanced Manufacturing Operations | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales (Trinity St Davids) | N/A | 120 | 1200 | Knowledge | English Only |
HND Mechanical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
University of Wales (Trinity St Davids) | N/A | 240 | 2400 | Knowledge | English Only |
HNC in Mechanical Technology | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | 150 | 1500 | Knowledge | English Only |
Annex 6 Wind Generation
Please choose one of the following knowledge qualifications:
Foundation Degree FdEng in Industrial Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Glyndwr University | N/A | N/A | N/A | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 120 | 1200 | Knowledge | English Only |
Annex 7 Marine
Please choose one of the following knowledge qualifications:
| Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 5 Higher National Diploma in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/7 | 120 | 1200 | Knowledge | English Only |
Annex 8 Space Engineering
Please choose one of the following knowledge qualifications:
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |
Pearson BTEC Level 4 Higher National Certificate in Aeronautical Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1164/5 | 120 | 1200 | Knowledge | English Only |
Annex 9 Rail Engineering
Please choose one of the following knowledge qualifications:
Pearson BTEC Level 4 Higher National Certificate in Engineering | |||||
Awarding Body | Qualification No. | Credit Value | Total Qualification Time | Competence / Knowledge / Combined | Qualification Assessment Language(s) |
Pearson | C00/1163/6 | 120 | 1200 | Knowledge | English Only |